FR Shirts (8)

• TenCate Tecasafe® Plus 480.
• FR reflective tape Hoop pattern around body and sleeve
• FR Modacrylic Lyocell Aramid 160 gsm.
• 2 piece structured collar.
• Concealed press stud centre front closure.
• Sleeve cuff with plastic press snap closure.
• Two way radio loop or gas monitor loop on both sides.
• Left pocket with pen division.
• Twin Bisley signature single mitred chest pockets with plastic press snap flap closure.
• Button through front style.
• Action back panel ventilation, 3 openings.

Meets the following Australian standards:

NFPA70E: ELECTRICAL SAFETY IN THE WORKPLACE

• ASTM F 1959 / F1959M according to ASTM F1506-10a.

NFPA2112: FLAME RESISTANT GARMENTS FOR PROTECTION OF INDUSTRIAL PERSONNEL AGAINST FLASH FIRE

• ASTM F1930:2012 Flash Fire Exposure (% body burn [2 cal/cm /sec] @ 3 sec) 15%
• ASTM D6413 / D6413M-13a Vertical Flame Test

ISO11612: PROTECTIVE CLOTHING AGAINST HEAT AND FLAME

AS/NZS 4602.1:2011: HI VISIBILITY SAFETY GARMENTS. GARMENTS FOR HIGH RISK APPLICATION 

• This garment has a minimum of 0.2sqm of hi visibility fabric on the front and back and retro-reflective taping configuration - hoop pattern to meet day & night standard

AS/NZS 1906.4:2010: HI VISIBILITY MATERIAL FOR SAFETY GARMENTS

• This garment meets the fluorescent capabilities and the chromaticity reading to ensure that the bright colours are within the required colour range. Retro-reflective tape on this garment also meets the higher retro-reflective performance required.

• This garment has a sun protection rating of UPF 50+ for all colours

• TenCate Tecasafe® Plus 700.
• FR Modacrylic Lyocell Aramid 238 gsm.
• 2 piece structured collar.
• Two way radio loop or gas monitor loop on both sides.
• Left pocket with pen division.
• Twin Bisley signature single mitred chest pockets with plastic press snap flap closure.
• Button through front style.
• FR reflective tape Hoop pattern around body and sleeve.
• Full gusset sleeve cuff with plastic press snap closure.
• Action back panel ventilation, 3 openings.
• Underarm ventilation

Meets the following Australian standards:

NFPA70E: ELECTRICAL SAFETY IN THE WORKPLACE

• ASTM F 1959 / F1959M according to ASTM F1506-10a.

NFPA2112: FLAME RESISTANT GARMENTS FOR PROTECTION OF INDUSTRIAL PERSONNEL AGAINST FLASH FIRE

• ASTM F1930:2012 Flash Fire Exposure (% body burn [2 cal/cm /sec] @ 3 sec) 15%
• ASTM D6413 / D6413M-13a Vertical Flame Test

ISO11612: PROTECTIVE CLOTHING AGAINST HEAT AND FLAME

AS/NZS 4602.1:2011: HI VISIBILITY SAFETY GARMENTS. GARMENTS FOR HIGH RISK APPLICATION 

• This garment has a minimum of 0.2sqm of hi visibility fabric on the front and back and retro-reflective taping configuration - hoop pattern to meet day & night standard

AS/NZS 1906.4:2010: HI VISIBILITY MATERIAL FOR SAFETY GARMENTS

• This garment meets the fluorescent capabilities and the chromaticity reading to ensure that the bright colours are within the required colour range. Retro-reflective tape on this garment also meets the higher retro-reflective performance required.

• This garment has a sun protection rating of UPF 50+ for all colours

• 2 piece structured collar.
• 2 cargo style squared chest pockets with button down flaps.
• Left chest pocket with pen division.
• Centre back, reinforced box pleat allows increased shoulder movement.
• Contrast, natural coloured buttons.
• Double layered yoke on upper back.
• Reinforced, triple-stitched seams for extra durability.
• All natural cotton fibre assists in the control of static electricity.
• Excellent sun protection with a rating of UPF 50+.
• Half closed, button front placket.
• Pure Cotton Preshrunk Drill (190gsm).

Meets the following Australian standards:

• Static Control AS/NZS 1020.
• Sun Protection AS/NZS 4399. (50+).

• TenCate Tecasafe® Plus 580.
• FR Modacrylic Lyocell Aramid 197 gsm.
• 2 piece structured collar.
• Two way radio loop or gas monitor loop on both sides.
• Left pocket with pen division.
• Twin Bisley signature single mitred chest pockets with plastic press snap flap closure.
• Button through front style.
• FR reflective tape Hoop pattern around body and sleeve.
• Full gusset sleeve cuff with plastic press snap closure.

Meets the following Australian standards:

NFPA70E: ELECTRICAL SAFETY IN THE WORKPLACE

• ASTM F 1959 / F1959M according to ASTM F1506-10a.

NFPA2112: FLAME RESISTANT GARMENTS FOR PROTECTION OF INDUSTRIAL PERSONNEL AGAINST FLASH FIRE

• ASTM F1930:2012 Flash Fire Exposure (% body burn [2 cal/cm /sec] @ 3 sec) 15%
• ASTM D6413 / D6413M-13a Vertical Flame Test

ISO11612: PROTECTIVE CLOTHING AGAINST HEAT AND FLAME

AS/NZS 4602.1:2011: HI VISIBILITY SAFETY GARMENTS. GARMENTS FOR HIGH RISK APPLICATION 

• This garment has a minimum of 0.2sqm of hi visibility fabric on the front and back and retro-reflective taping configuration - hoop pattern to meet day & night standard

AS/NZS 1906.4:2010: HI VISIBILITY MATERIAL FOR SAFETY GARMENTS

• This garment meets the fluorescent capabilities and the chromaticity reading to ensure that the bright colours are within the required colour range. Retro-reflective tape on this garment also meets the higher retro-reflective performance required.

• This garment has a sun protection rating of UPF 50+ for all colours

• TenCate Tecasafe® Plus 580.
• FR Modacrylic Lyocell Aramid 197 gsm.
• 2 piece structured collar.
• Two way radio loop or gas monitor loop on both sides.
• Left pocket with pen division.
• Twin Bisley signature single mitred chest pockets with plastic press snap flap closure.
• Button through front style.
• FR reflective tape Hoop pattern around body and sleeve.
• Full gusset sleeve cuff with plastic press snap closure.
• Action back panel ventilation, 3 openings.
• Underarm ventilation

Meets the following Australian standards:

NFPA70E: ELECTRICAL SAFETY IN THE WORKPLACE

• ASTM F 1959 / F1959M according to ASTM F1506-10a.

NFPA2112: FLAME RESISTANT GARMENTS FOR PROTECTION OF INDUSTRIAL PERSONNEL AGAINST FLASH FIRE

• ASTM F1930:2012 Flash Fire Exposure (% body burn [2 cal/cm /sec] @ 3 sec) 15%
• ASTM D6413 / D6413M-13a Vertical Flame Test

ISO11612: PROTECTIVE CLOTHING AGAINST HEAT AND FLAME

AS/NZS 4602.1:2011: HI VISIBILITY SAFETY GARMENTS. GARMENTS FOR HIGH RISK APPLICATION 

• This garment has a minimum of 0.2sqm of hi visibility fabric on the front and back and retro-reflective taping configuration - hoop pattern to meet day & night standard

AS/NZS 1906.4:2010: HI VISIBILITY MATERIAL FOR SAFETY GARMENTS

• This garment meets the fluorescent capabilities and the chromaticity reading to ensure that the bright colours are within the required colour range. Retro-reflective tape on this garment also meets the higher retro-reflective performance required.

• This garment has a sun protection rating of UPF 50+ for all colours

• TenCate Tecasafe® Plus 580.
• FR Modacrylic Lyocell Aramid 197 gsm.
• 2 piece structured collar.
• Two way radio loop or gas monitor loop on both sides.
• Left pocket with pen division.
• Twin Bisley signature single mitred chest pockets with plastic press snap flap closure.
• Button through front style.
• FR reflective tape Hoop pattern around body and sleeve.
• Full gusset sleeve cuff with plastic press snap closure.

Meets the following Australian standards:

NFPA70E: ELECTRICAL SAFETY IN THE WORKPLACE

• ASTM F 1959 / F1959M according to ASTM F1506-10a.

NFPA2112: FLAME RESISTANT GARMENTS FOR PROTECTION OF INDUSTRIAL PERSONNEL AGAINST FLASH FIRE

• ASTM F1930:2012 Flash Fire Exposure (% body burn [2 cal/cm /sec] @ 3 sec) 15%
• ASTM D6413 / D6413M-13a Vertical Flame Test

ISO11612: PROTECTIVE CLOTHING AGAINST HEAT AND FLAME

AS/NZS 4602.1:2011: HI VISIBILITY SAFETY GARMENTS. GARMENTS FOR HIGH RISK APPLICATION 

• This garment has a minimum of 0.2sqm of hi visibility fabric on the front and back and retro-reflective taping configuration - hoop pattern to meet day & night standard

AS/NZS 1906.4:2010: HI VISIBILITY MATERIAL FOR SAFETY GARMENTS

• This garment meets the fluorescent capabilities and the chromaticity reading to ensure that the bright colours are within the required colour range. Retro-reflective tape on this garment also meets the higher retro-reflective performance required.

• This garment has a sun protection rating of UPF 50+ for all colours

• TenCate Tecasafe® Plus 580.
• FR Modacrylic Lyocell Aramid 197 gsm.
• 2 piece structured collar.
• Two way radio loop or gas monitor loop on both sides.
• Left pocket with pen division.
• Twin Bisley signature single mitred chest pockets with plastic press snap flap closure.
• Button through front style.
• FR reflective tape Hoop pattern around body and sleeve.
• Full gusset sleeve cuff with plastic press snap closure.
• Action back panel ventilation, 3 openings.
• Underarm ventilation

Meets the following Australian standards:

NFPA70E: ELECTRICAL SAFETY IN THE WORKPLACE

• ASTM F 1959 / F1959M according to ASTM F1506-10a.

NFPA2112: FLAME RESISTANT GARMENTS FOR PROTECTION OF INDUSTRIAL PERSONNEL AGAINST FLASH FIRE

• ASTM F1930:2012 Flash Fire Exposure (% body burn [2 cal/cm /sec] @ 3 sec) 15%
• ASTM D6413 / D6413M-13a Vertical Flame Test

ISO11612: PROTECTIVE CLOTHING AGAINST HEAT AND FLAME

AS/NZS 4602.1:2011: HI VISIBILITY SAFETY GARMENTS. GARMENTS FOR HIGH RISK APPLICATION 

• This garment has a minimum of 0.2sqm of hi visibility fabric on the front and back and retro-reflective taping configuration - hoop pattern to meet day & night standard

AS/NZS 1906.4:2010: HI VISIBILITY MATERIAL FOR SAFETY GARMENTS

• This garment meets the fluorescent capabilities and the chromaticity reading to ensure that the bright colours are within the required colour range. Retro-reflective tape on this garment also meets the higher retro-reflective performance required.

• This garment has a sun protection rating of UPF 50+ for all colours

• TenCate Tecasafe® Plus 700.
• FR Modacrylic Lyocell Aramid 238 gsm.
• 2 piece structured collar.
• Two way radio loop or gas monitor loop on both sides.
• Left pocket with pen division.
• Twin Bisley signature single mitred chest pockets with plastic press snap flap closure.
• Button through front style.
• FR reflective tape Hoop pattern around body and sleeve.
• Full gusset sleeve cuff with plastic press snap closure.
• Action back panel ventilation, 3 openings.
• Underarm ventilation

Meets the following Australian standards:

NFPA70E: ELECTRICAL SAFETY IN THE WORKPLACE

• ASTM F 1959 / F1959M according to ASTM F1506-10a.

NFPA2112: FLAME RESISTANT GARMENTS FOR PROTECTION OF INDUSTRIAL PERSONNEL AGAINST FLASH FIRE

• ASTM F1930:2012 Flash Fire Exposure (% body burn [2 cal/cm /sec] @ 3 sec) 15%
• ASTM D6413 / D6413M-13a Vertical Flame Test

ISO11612: PROTECTIVE CLOTHING AGAINST HEAT AND FLAME

AS/NZS 4602.1:2011: HI VISIBILITY SAFETY GARMENTS. GARMENTS FOR HIGH RISK APPLICATION 

• This garment has a minimum of 0.2sqm of hi visibility fabric on the front and back and retro-reflective taping configuration - hoop pattern to meet day & night standard

AS/NZS 1906.4:2010: HI VISIBILITY MATERIAL FOR SAFETY GARMENTS

• This garment meets the fluorescent capabilities and the chromaticity reading to ensure that the bright colours are within the required colour range. Retro-reflective tape on this garment also meets the higher retro-reflective performance required.

• This garment has a sun protection rating of UPF 50+ for all colours